|
Used impact tester class 1
partial with
-
motorised impact pendulum hammer lifting
-
protection housing
Below we show some use impact testing machines. This pictures and
descriptions are examples. Used machine are not every time available –
please ask for an actual offer.
Hint: Prior sale reserved at any time!
example of supply –
other machine on request) | |
|
Impact tester LOSENHAUSEN 150 + 300 Joule potential energy 
|
| |
manufacturer |
: |
LOSENHAUSEN |
Type |
: |
PSW 15 / 30 |
Test according |
: |
EN 10045 optional according ASTM |
Type of test |
: |
CHARPY optional IZOD |
Hammer lifting |
: |
manual by user (manual lifting of hammer to 160°) |
Evaluation |
: |
Analogue with main pointer and following pointer; the following
pointer has to be zeroed before the test manual. After the test the
result can be read out easily by looking on to the pointer needle =
result in joule |
Option |
: |
Modernisation of evaluation with electronic incremental angle
gauge, electronic and software |
Measuring range |
: |
300 + 150 Joule; basic hammer 150 J., additional masses 300 J. |
Change of measuring range |
: |
Assembling / dismantling the additional masses |
Pendulum brake |
: |
tensioning a brake belt |
Specimen centring |
: |
Mechanical swing mechanism with nose as support for notch |
Dimensions (H/L/D) |
: |
1250 / 620 / 500 mm (ask for sketch |
Needed space |
: |
ca. 2500 x 1000 (ask for sketch |
Weight (kg) |
: |
ca. 800 |
Foundation masses |
: |
Minimum 800 kg (40-times of weight of hammer masses) |
Scope of supply |
: |
stiff, resonance optimised frame, pendulum hammer with fin (CHARY
EN) and supports, centring device for centring impact specimen with
notch, analogue scale with mean pointer and following pointer,
mechanical two hand release |
CE-Konformität |
: |
yes, with safety housing |
Delivery costs |
: |
On Expenditure for complete delivery:
Transport (by forwarder or
direct by technician), setup , training, calibration (DKD –
calibration) |
|
Hint:
To deliver the machine with CE-confirmation certificate (user
protection / safety system) it is binding to supply also protection
housing. Without a protection housing we will only supply a
"suppliers certificate“ with binding instructions to setup a
protection housing by yourself.
|
Option:
The machine can be delivered with modernisation for impact testers:
evaluation with electronic incremental angle gauge, electronic and
WINDOWS-Software.
Hint:
Please also pay attention to specimen preparation: SCHÜTZ + LICHT is
the only supplier in Europe that built and supplies a
impact specimen notching machine
for to notch the impact specimens according the standard – Very easy
to use – 3 to 4 specimens notched per minute.
|
Impact tester
MFL
(MOHR+FEDERHAFF LOSENHAUSEN) 300 Joule, mot. hammer lifting 
|
manufacturer |
: |
MFL |
Type |
: |
PSW 300 E |
Test according |
: |
EN 10045 optional according ASTM |
Type of test |
: |
CHARPY optional IZOD |
Hammer lifting |
: |
motorised
up to 160° |
Evaluation |
: |
Analogue with main pointer and following pointer; the following
pointer has to be zeroed before the test manual. After the test
the result can be read out easily by looking on to the pointer
needle = result in joule |
Option |
: |
Modernisation of evaluation with electronic incremental
angle gauge, electronic and software |
Measuring range |
: |
300 + 150 Joule; basic hammer 150 J., additional masses 300 J. |
Change of measuring range |
: |
Assembling / dismantling the additional masses |
Pendulum brake |
: |
electro mechanical brake |
Specimen centring |
: |
Mechanical swing mechanism with nose as support for notch |
Dimensions (H/L/D) |
: |
1250 / 620 / 500 mm (ask for sketch |
Needed space |
: |
ca. 2500 x 1000 (ask for sketch |
Weight (kg) |
: |
ca. 800 |
Foundation masses |
: |
Minimum 800 kg (40-times of weight of hammer masses) |
Scope of supply |
: |
stiff, resonance optimised frame, pendulum hammer with fin
(CHARY EN) and supports, centring device for centring impact
specimen with notch, analogue scale with mean pointer and
following pointer, electriacal two hand release |
CE-Konformität |
: |
yes, with safety housing |
Delivery costs |
: |
On Expenditure for complete delivery:
Transport (by
forwarder or direct by technician), setup , training,
calibration (DKD – calibration) |
|
Hint:
To deliver the machine with CE-confirmation certificate (user
protection / safety system) it is binding to supply also protection
housing. Without a protection housing we will only supply a
"suppliers certificate“ with binding instructions to setup a
protection housing by yourself.
|
Option:
The machine can be delivered with modernisation for impact testers:
evaluation with electronic incremental angle gauge, electronic and
WINDOWS-Software.
|
|
Hint:
Please also pay attention to specimen preparation: SCHÜTZ + LICHT is
the only supplier in Europe that built and supplies a
impact specimen notching machine for to
notch the impact specimens according the standard – Very easy to use
– 3 to 4 specimens notched per minute. |
|
Impact tester
WOLPERT 300 Joule, manual hammer lifting |
|
| |
manufacturer |
: |
WOLPERT |
Type |
: |
PSW 15 / 30 |
Test according |
: |
EN 10045 optional according ASTM |
Type of test |
: |
CHARPY optional IZOD |
Hammer lifting |
: |
manual by user (manual lifting of hammer to 160°) |
Evaluation |
: |
Analogue with main pointer and following pointer; the following
pointer has to be zeroed before the test manual. After the test the
result can be read out easily by looking on to the pointer needle =
result in joule |
Option |
: |
Modernisation of evaluation with electronic incremental
angle gauge, electronic and software |
Measuring range |
: |
300 + 150 Joule; basic hammer 150 J., additional masses 300 J. |
Change of measuring range |
: |
Assembling / dismantling the additional masses |
Pendulum brake |
: |
Brake drum with hand lever |
Specimen centring |
: |
Mechanical swing mechanism with nose as support for notch |
Dimensions (H/L/D) |
: |
1250 / 620 / 500 mm (ask for sketch |
Needed space |
: |
ca. 2500 x 1000 (ask for sketch |
Weight (kg) |
: |
ca. 800 |
Foundation masses |
: |
Minimum 800 kg (40-times of weight of hammer masses) |
Scope of supply |
: |
stiff, resonance optimised frame, pendulum hammer with fin (CHARY
EN) and supports, centring device for centring impact specimen with
notch, analogue scale with mean pointer and following pointer,
mechanical two hand release |
CE-Konformität |
: |
yes, with safety housing |
Delivery costs |
: |
On Expenditure for complete delivery:
Transport (by forwarder or
direct by technician), setup , training, calibration (DKD –
calibration) |
|
Hint:
To deliver the machine with CE-confirmation certificate (user
protection / safety system) it is binding to supply also protection
housing. Without a protection housing we will only supply a
"suppliers certificate“ with binding instructions to setup a
protection housing by yourself.
|
Option:
The machine can be delivered with modernisation for impact testers:
evaluation with electronic incremental angle gauge, electronic and
WINDOWS-Software.
|
Hint:
Please also pay attention to specimen preparation: SCHÜTZ + LICHT is
the only supplier in Europe that built and supplies a
impact specimen notching machine for to notch the impact
specimens according the standard – Very easy to use – 3 to 4
specimens notched per minute.
|
